Welcome to AKD Injection Resins

Saturday to Thursday 9:00 AM to 6:00 PM

MABI

Brand

Mabi

Length

60

Diameter

12mm

Type

Polymer (without valve)

  • Packer for Multistage injection
  • Pressure from 1 to 60 Bar
REQUEST FOR QUOTATION
Brand

Mabi

Length

60

Diameter

12mm

Type

Polymer – moulded round head nipple (with 3mm steel ball)

  • Packer for Reaction resins
  • Pressure from 1 to 150 Bar
  • Suitable for Concrete crack repair
REQUEST FOR QUOTATION
Brand

Mabi

Length

65

Diameter (Nipple)

12mm / 14mm

Type

Polymer – moulded round head nipple (with 3mm steel ball)

  • Packer for Mineral materials
  • Pressure from 1 to 60 Bar
  • Suitable for Rising damp treatment
REQUEST FOR QUOTATION
Brand

Mabi

Length

65

Diameter (Nipple)

12mm

Type

Polymer – Flat head (with 3mm steel ball)

  • Packer for Multistage injection
  • Pressure from 1 to 60 Bar
  • Suitable for Rising damp treatment
REQUEST FOR QUOTATION
Brand

Mabi

Length

77

Diameter (Nipple)

18mm

Type

Polymer – moulded round head nipple (with 3mm steel ball)

  • Packer for Acrylate gel injection
  • Pressure from 1 to 60 Bar
  • Suitable for Curtain injection
REQUEST FOR QUOTATION
Brand

Mabi

Length

80

Diameter (Nipple)

18mm

Type

Polymer – Flat head (with 6mm plastic ball / without valve)

  • Packer for Acrylate gel injection
  • Pressure from 1 to 60 Bar
  • Suitable for Curtain injection
REQUEST FOR QUOTATION
Brand

Mabi

Size

L=2m for Ø12/14mm injection-packers /
L=2m for Ø18mm injection-packers

Type

Diffusing tubes

  • Tubes to be connected at the bottom of the injection-packers.
  • Homogeneous spreading into the whole depth due to micro-holes.
REQUEST FOR QUOTATION
Brand

Mabi

Size

L=2m for Ø12/14mm injection-packers /
L=2m for Ø18mm injection-packers

Type

Extension rods

  • Tubes to be connected at the bottom of the injection-packers.
REQUEST FOR QUOTATION
Brand

Mabi

Size

Female mounting tool for injectors with head Ø 12/14/18
Male mounting tool for injectors without head Ø 6.5/9.5/12

Type

Mounting tool

Material

Polyethylene

  • The mounting tool is used for setting up the injectors without damaging the connection.
  • It is also very useful for hard-to-reach areas.
REQUEST FOR QUOTATION
 whatsapp